Eco Jetski – First American Electricity-Powered Jetski
Electric vehicle industry has evolved so much, that in only few years, any type of vehicle powered by fossil fuels was replaced by new electric models.Until now, usual jetskis were producing an aggressive pollution process, being considered as one of the most un-ecofriendly rides.Eco-F3 Race Car Powered by Chocolate
Industries are producing monthly environmentally friendly cars and this field is in a continuous progress.Hybrid car models are in increasing number,companies launch more powerful models, which pollute less the environment or with 0 emissions.
Recently was created a new prototype, a car made from plant that runs on chocolate(powered by chocolate).This chocolate car can reach a speed of 145 miles (200 km / h).Manufacturing technology is based on plant fibers that are combined with resins to produce all parts of the car and the chocolate oils are refined to produce biofuel.The car name is Eco F3 and researchers hope that this car will be used in all major competitions.
The seats are made from soybean and the shift gear is made from carrots.It is the
Regenerative Charging Stations for Electric Vehicles
The stationary charger has more power and efficiency, but it reduces the vehicle independency.The requirements for a stationary charger are:the output voltage situated between 60 and 200 V and the current intensity from 20 to 200 Amps.
The charging stations require an infrastructure connected to existing electric supplying networks.This infrastructure must have some characteristics:
- The type of material to be used for terminals, protection, signalisation;
- The localisation of the charging plug;
- The connection between vehicle and clamps;
- The security related to electrotechnical installation.
The inductive charging eliminates the problem of wiring the vehicle to the charger (wear and crrosion, influence of water, ice, oil and dirt, vandalism).The inductive charger operates on the principle of a transformer.The primary windings are vertically located on the wall or horizontally, on the vehicle’s board, together with the actual charger.Charging process consists of driving the vehicle close to the primary windings (the clereance of 5 cm, between primary and secondary windings, is sufficient for an inductive coupling between both windings).
Regenerative energy supply is required to protect the environment in the transport sector.The wind and the sun are significant energy sources at the moment.Wind installations are generally limites to a hundred kilowatts.A solar station can be up to 1,5 kW.The cost of a recharging station is to high at this moment, but the installation is expected to be the future potential reimplacement of the conventional recharging stations supplied by the electric network distribution.
Car That Runs on Cow Dung Methane
Video of How to Build a Magnetic Motor
Theoretically speaking, a magnetic motor is a device that converts magnetic energy into mechanical energy. Usually, a magnetic motor procuce a rotating motion without using other energy sources. One of the most popular magnetic motor is the Penderev motor and is based on the magnetic rejection principle. This engine has a rotor that rotates around its own longitudinal axis and a set of magnetic sources arranged on a stator around the rotor. In the rotor there are some magnets wich interact with a second set of magnets around the rotor. Inside the rotor and stator there are some holes where are located the magnetic sources. These holes are placed perpendicularly to the rotation axis, and magnetic sources are cylindrical magnets of 360000 Gauss, with 37mm diameter and 75mm length.
In the next movie you will see how the Penderev motor works:
You can try to build a mini magnetic motor at home, in this way:
Air Car VS Car That Runs With Water
The first car that used compressed air to make the pistons move was named “Air Car” and was released 2 years ago, by a builder of India.This car powered by compressed air, was not producing CO2 emissions.But to produce the compressed air was needed fossil fuels combustion(which means that there is still a small loss).Anyway,CO2 emissions were lower than a diesel engine.
Then appears something that in my opinion is even more avantageous.The car that runs with water.This thing was possible by separating the elements of water (H20) in gas HHO.Watch the movie below to understand how it works:
Now,what do you think?Which is most convenient car for you?The “Air Car” or the “Water Car“?
First Electric Car Charging Station
Nowadays we see that electric cars number is clearly growing,because this type of vehicles offers some important advantages, and people buy them without any delay.
We all know that the operation principle of these vehicles is based on batteries!These batteries are built with advanced technology, and are very efficient (have a high capacity of energy storage).Even so, sometimes these batteries should be charged for operate at normal parameters.
For this reason people are starting to build power stations for those hybrid, electric vehicles.Some days ago in Frankfurt, Germany was inaugurated a building of this kind,which is actually, The First Electric Car Charging Station from Germany(a loading station for electric cars).
This station is equipped with solar panels which distributes electricity for charging electric cars,small electric vehicles,scooters or other devices used on urban movement.This station was built in one of the crowded places from Frankfurt, in order to be available to anyone who passes and needs electricity for his electric vehicle.
Projects like this one will appear in a growing number becouse the electric vehicle production is also in growing number.